1 Ton Dual-Stage With EDI Ultrapure Water Equipment Machine For
Medical Purposes
Product Description
Equipment used to produce pure water for medical needs. The whole
system is also made of all stainless steel material combination,
and before the water point must be equipped with sterilization
device. Using reverse osmosis, EDI and other latest technology,
more targeted design of a complete set of high-purity water
treatment process to meet the pharmaceutical companies, hospitals,
purified water production, I.V. production of water requirements.
Parameter Table
| Model | Water Making
Ability | Inlet
Caliber(mm) | Effluent
Caliber(mm) | Blowdown
Caliber(mm) | Size(mm) | Power(KW) |
| EDI-2-PVC-0.25T | 250L/H | 25 | 25 | 25 | 1700*800*1700 | 3 |
| EDI-3-PVC-0.25T | 250L/H | 25 | 25 | 25 | 2000*800*1700 | 3 |
| EDI-2-304-0.25T | 250L/H | 25 | 25 | 25 | 2200*650*1750 | 3 |
| EDI-3-304-0.25T | 250L/H | 25 | 25 | 25 | 2500*650*1750 | 3 |
| EDI-2-PVC-0.5T | 500L/H | 32 | 25 | 25 | 1700*800*1700 | 3.7 |
| EDI-3-PVC-0.5T | 500L/H | 32 | 25 | 25 | 2000*800*1700 | 3.7 |
| EDI-2-304-0.5T | 500L/H | 32 | 25 | 25 | 2300*700*1750 | 3.7 |
| EDI-3-304-0.5T | 500L/H | 32 | 25 | 25 | 2600*700*1750 | 3.7 |
| EDI-2-PVC-1T | 1000L/H | 32 | 32 | 32 | 2500*750*1950 | 4.6 |
| EDI-3-PVC-1T | 1000L/H | 32 | 32 | 32 | 3000*750*1950 | 4.6 |
| EDI-2-304-1T | 1000L/H | 32 | 32 | 32 | 3000*750*1950 | 4.6 |
| EDI-3-304-1T | 1000L/H | 32 | 32 | 32 | 3500*750*1950 | 4.6 |
| EDI-PVC-0.25T | 250L/H | 25 | 25 | 25 | 800*600*1500 | 0.37 |
| EDI-304-0.25T | 250L/H | 25 | 25 | 25 | 800*600*1500 | 0.37 |
| EDI-PVC-0.5T | 500L/H | 25 | 25 | 25 | 800*600*1500 | 0.55 |
| EDI-304-0.5T | 500L/H | 25 | 25 | 25 | 800*600*1500 | 0.55 |
| EDI-PVC-1T | 1000L/H | 32 | 32 | 32 | 800*600*1500 | 0.55 |
| EDI-304-1T | 1000L/H | 32 | 32 | 32 | 800*600*1500 | 0.55 |
| EDI-PVC-2T | 2000L/H | 32 | 32 | 32 | 1000*600*1500 | 0.75 |
| EDI-304-2T | 2000L/H | 32 | 32 | 32 | 1000*600*1500 | 0.75 |
| Description:EDI ultrapure water equipment is a two-stage reverse
osmosis equipment + EDI equipment, generally 0.25-1 tons can be
made into a one-piece machine, can also be made into a component
level, 2 tons and above are made into a component machine |
Product Characteristics
Medical water purification equipment features, purified water
storage cycle should not be greater than 24 hours, its tank should
be made of stainless steel or verified non-toxic,
corrosion-resistant, non-leaching contaminating ions of other
materials. Protect its air vent should be installed without
shedding fibers of hydrophobic sterilization filter. The inner wall
of the tank should be smooth, the receiver and welds should not
have dead ends and trachoma.
Key technologies
1.The system adopts full-automatic control (manual control is also
available), and automatic backwashing and regeneration programs can
be set when the system is running.
2.Primary reverse osmosis and secondary reverse osmosis are
equipped with reflux piping, and the reverse osmosis equipment is
equipped with a chemical cleaning device and a disinfection device.
3.The primary reverse osmosis piping is made of 304 stainless
steel, and the secondary reverse osmosis is made of 316L stainless
steel.
Products Display
